“123 HP Com OJ6950” Printer mainly designed for small and business users, it is an All-in-One Wireless Printer. Then, It is a Budget-Friendly Printer 123 hp com oj6950 and gives better performance. It can print, scan, copy and Fax at a lower cost. HP OfficeJet 6950 supports both WiFi and WiFi Direct but Ethernet connection is not supported. It is Office Centric Printer and it supports Two-Sided Printing with an Automatic Document Feeder. It also produces high-quality photos at a higher performance rate. For the Printer Setup, follow these Instructions
UnBox your HP OfficeJet 6950 Printer-123 hp com oj6950
At First, Open the HP OfficeJet 6950 Printer Box and you can find the Software Installation CD for Windows and Mac.
If you misplace this disc, you can download the 123 hp com oj6950 printer driver software from the HP Official Website.
Use the Setup Poster that came with the Package for the 123 hp com setup 6950 setup process. Then. use the Step By Step Instructions to complete the Printer Setup Process.
Use Get Started Guide for additional Information and the Troubleshooting method. While you can get more information about the Printer and its service with the Instant Ink Service plan.
You can find the complete set of Ink Cartridges, which is important for Basic Printer Setup123 hp com setup 6950. However, avoid using the local ink cartridges as the Replacement Cartridges.
Use the Power Cord, that came along with the printer package for the printer connection. It is recommended to use the power cord along with the package for the power connection.
Use a Two-wire phone cable for the fax connection. Now, Gently take the printer out of the box by pulling the Plastic Bag.
Set the box and Styrofoam aside, which can be reused. All the Packing Materials are recyclable you can get more information from 123 hp com setup 6950.
Now, Remove all the blue tape and protective plastic around the printer device. After that, Slide open the Output tray and get rid of all the packing materials.
Lift open the Scanner lid and remove the Styrofoam sheet, Connect the Power Cord to the rear end of the printer and to the power outlet.
HP OfficeJet 6950 Printer Setup
Firstly, Turn On your 123 hp com oj6950 Printer Device and set your basic preferences such as preferred language, Time Zone, and Region. In the End, Touch OK to confirm the settings.
Now, Click ” Continue Setup ” to continue the process 123 hp com setup 6950. To Place, the Ink cartridges, Open the ink carriage access door and install the ink cartridge in their allotted slots.
After that, Twist the Orange cap in an anti-clockwise Direction and Place them in their respective position.
Close the ink carriage access door so that the device can start the printing process. Touch Ok in the Printer’s Display may prompt you to load an Unused sheet into the input tray.
Slide open the input tray and load a stack of paper. Finally, Press OK and confirm the Paper Type and Size.
After a while, Your Printer Device automatically prints an alignment page. Now, Place the Alignment Page into the Scanner lid and touch the scan to scan the alignment page.
The Alignment process was successful message will get displayed. Now, your Printer Device is Ready to Use.
Our Site Provides assistance for Hardware Setup, Driver Installation, mobile printing, and Trouble Shooting Instructions. We are third-party service providers who don’t own any Information or images. All the Information and images are owned by HP Manufacturer. View our Terms and Condition to get more information about our site “123.hp.com/setup 6950” and it is recommended to view our privacy policy.